Download Canon Imagerunner Advance 8085, 8095, 8105 Series Service Manual PDF

TitleCanon Imagerunner Advance 8085, 8095, 8105 Series Service Manual
TagsElectrical Connector Digital & Social Media Digital Technology Hard Disk Drive Signal (Electrical Engineering)
File Size99.2 MB
Total Pages1385
Table of Contents
                            Cover
Contents
Safety Precautions
	CDRH Act
	Laser Safety
	Handling of Laser System
	Turn power switch ON
	Safety of Toner
		About Toner
		Toner on Clothing or Skin
	Notes Before it Works Serving
	Points to Note at Cleaning
1 - Product Overview
	Product Lineup
		Main Body
		Pickup/Delivery System Option
			Applicable Option for Each Model
			Required Options/Conditions
		Scanning System Options
			Required Options and Conditions
		Function Expansion System Options
			Required Options and Conditions
	Features
		Product Features
		Service Features
			Improved Service Operability
			New Service Mode
			Improved Upgrading Operability
			Jam/Error Code Display Specifications
			Applying New Connectors
	Specifications
		Product Specifications
		Power Supply Specifications:
		Weight and Size
		Productivity (Print Speed)
		Paper Type
	External View/Internal View
		External View
			External Cover
			Switches, I/F, Others
		Cross-Section View
	Operation
		Power Switch
			Types of Power Switches
			Points to Note on Turning ON/OFF the Power Switch
		Control Panel
			Control Panel
			Main Menu
			Differences in Main Menu
			Settings/Registration Menu
			Differences in Settings/Registration Menu
2 - Technology
	Basic Configuration
		Functional Configuration
		Basic Sequence
			Basic sequence at power ON
			Basic sequence at printing <Condition: A4 1-sided (2 sheets), Right deck, Reverse delivery>
			Basic sequence at printing <Condition: A4 2-sided (2 sheets), Right deck, Reverse delivery>
	Main Controller
		Overview
			Features
			Specifications/configuration
			HDD
			Boot/Shutdown sequence
		Controls
			Flow of Image Data
			Security features (encryption key and certificate, password protection)
			High capacity HDD (Option)
			HDD mirroring feature (option)
			Removable HDD (option)
			HDD Encryption/ Mirroring Kit (optional)
		Service Operations
			HDD
			Main Controller PCB 1
			Main Controller PCB 2
			TPM PCB
			Flash PCB
	Laser Exposure System
		Overview
			Overview
			Specifications
			Parts Configuration
		Controls
			Overview
			Laser ON Timing Control
			Laser Beam Intensity Control
			Duplex print magnification correction
			Polygon Motor Control
			Laser Shutter Control
		Servicing
			Periodically Replaced Parts
			Consumable Parts
			Periodical Servicing List
			When Replacing Parts
			Major Adjustments
	Image Formation System
		Overview
			Overview
			Specifications
			Parts Configuration
			Drive Configuration
			Print Process
		Controls
			Exposure
			Primary Charging
			Developing
			Transfer
			Separation
			Drum Cleaning
			Drum-related Issues
			Drum Heater Control
			Toner Supply Area
			Waste Toner Feeding Area
			Image Stabilization Control
			Auxiliary Control
		Servicing
			Periodically Replaced Parts
			Consumable Parts
			Periodical Servicing List
			When Replacing Parts
			Major Adjustments
			Troubleshooting
	Fixing
		Overview
			Characteristics
			Specifications
			Parts configuration
			Drive configuration
		Controls
			Overview
			Fixing temperature control
			Down sequence control
			Paper Anti-wrapping Control
			Thermistor reciprocating control
			Upper separation claw reciprocating control
			Cleaning web drive control
			Cleaning web length detection
			Protective function
		Servicing
			Periodically Replaced Parts
			Consumable Parts
			Periodical Servicing List
			When Replacing Parts
			Troubleshooting
	Pickup / Feed System
		Overview
			Overview
			Specifications
			Parts configuration
			Drive Configuration
			Paper path
			Interval speed
			Various types of control
		Deck/Cassette Pickup Unit
			Basic Movement
			Deck/Cassette detection
			Paper Size Detection
			Paper Level Detection
			Paper Detection
			Lifter Control
			Pickup Retry Control
		Multi-purpose Tray Pickup Unit
			Basic Movement
			Paper Size Detection
			Paper Detection
		Registration Unit
			Pre-registration Control
			Registration Control
			Registration Deceleration Control
			Registration Acceleration Control
			Post-transfer Guide Attraction Control
		Delivery/Reverse Unit
			Basic Operation
			Duplex Unit
			Side Registration Control
			Circulation quantity and limit
		Jam Dection
			Jam Code List
			Forced Paper Feed Control
		Servicing
			Periodically Replaced Parts
			Consumable Parts
			Periodical Servicing List
			When Replacing Parts
			Major Adjustments
			Troubleshooting
	External Auxiliary System
		Overview
			Power Supply Configuration
		Controls
			Power supply control
			Fan Control
			Counter control
		Servicing
			Periodically Replaced Parts
			Consumable Parts
			Periodical Servicing
			DC Controller PCB
			Troubleshooting
	MEAP
		Changes
			Abolition of Supplying MEAP Administrator's CD with Machine
		Checking the Operating Environment
			Outline
			SMS
			SSO-H Management
		Setting Up the Network
			Network configuration process
		Login to SMS
			Outline
			Login by Password Authentication
			Login by RLS Authentication
			Initial Display Languages of SMS
		Setting the method to login to SMS
			Outline
			Setting for login by Password Authentication
			Setting for login by RLS Authentication
		Checking MEAP Application Management Page
			About MEAP Application Management Page
		Starting and Stopping a MEAP Application
			Procedure to start and stop a MEAP application
		Checking the Platform Information
			The check procedure of the platform information
		MEAP Specifications
			What is MEAP Specifications (MEAP Spec Version)?
			About Name
			Mechanism
		MEAP Application System Information
			Outline
			Checking the System Information of a MEAP Application with SMS
			Printing the System Information of a MEAP Application
			Content of MEAP system information
		Installing an Application
			Resource
			Procedure to install applications
		Adding a License File
			Procedure adding a license file
		Disabling a License File
			Procedure disabling a license file (suspending a license)
		Downloading / Removing an Invalidated License File
			Outline
			Procedure downloading / removing an invalidated license file
		Reusable license
			Outline
		License for forwarding
			Outline
			Procedure to create license for forwarding
		Uninstalling an Application
			Procedure to uninstall an application
		Login Service
			About Login Service
			Default Authentication overview
			SSO-H (Single Sign-On-H) overview
			Authentication methods of SSO-H
			Access Mode in Sites
			Environment confirmation
			Specification of SSO-H
		Changing Login Services
			Steps to Change Login Services
		Initializing the Password
			Outline
			Procedure to initialize the SMS login password
		Creating a Backup, Formatting the Hard Disk, Restoring with the Backup data, Using the SST
			Outline
			Backup Items
			Requirements for Backup Using the SST
			Making a Backup and Formatting Hard Disk Drive with Service Support Tool
			Procedures to Restore Backup Data
		Replacing the Hard Disk Drive
			Outline
			HDD replacement procedure
		MEAP Safe Mode (level 2)
			Outline
			Starting in Safe Mode
			How to cancel MEAP SAFE mode
		Setting HTTP port for MEAP application (level 2)
			Outline
			Port setup procedure of HTTP Server
			Port setup procedure of HTTPS Server
		Using USB Devices
			USB Driver
			Initialization of MEAP driver priority registration
			USB Device report print
		Reference material
			Glossary
		Option for exclusive individual measure
			Display Setting of Copy Icon (level2)
			Error at starting up the MEAP application/Setting to hide JAM screen (level 2)
			Setting of Screen Transition from MEAP Screen to the Standard Screen (level2)
	Embedded RDS
		Product Overview
			Overview
			Features and benefits
			Major Functions
		Limitations
			Service Mode Menu Transmission Function
		Service cautions
		E-RDS Setup
			Confirmation and preparation in advance
			E-RDS-related setting items
			Steps to E-RDS settings
			Steps to Service Call button settings
			Steps to Service Browser settings
			Initializing E-RDS settings
		FAQ
		Troubleshooting
		Error code and strings
3 - Periodic Service
	Periodical Service Operation Item
4 - Parts Replacement and Clearning
	List of Parts
		List of External / Internal Cover
		List of Main Unit
		Periodic Replacing Parts,Durable Parts,Cleaning Parts
			Periodic Replacing Parts,Durable Parts
			List of Cleaning Parts
		List of Fan
		List of Clutch / Solenoid
		List of Motor
		List of Sensor
		List of Switch
		List of PCB
		Heater,others
		Connector List
	Main Controller
		Removing Main Controller PCB 1
		Removing Main Controller PCB 2
	Laser Exposure System
		Removing the Laser Scanner Unit
		Cleaning the Dust Collecting Glass
	Image Formation System
		Removing the Primary Charging Assembly
		Removing the Primary Charging Wire Cleaner, Cleaner Holder (Right/Left)
		Replacing the Primary Charging Assembly Grid Wire
		Replacing the Primary Charging Wire
		Cleaning the Primary Charging Assembly Grid Wire
		Removing the Pre-transfer Charging Assembly
		Removing the Pre-transfer Charging Wire Cleaner, Cleaner Holder
		Replacing the Pre-transfer Charging Wire
		Cleaning the Pre-transfer Charging Wire
		Removing the Process Unit
		Cleaning the Process Unit
		Removing the Drum Cleaning Unit
		Removing the Drum Cleaning Blade
		Cleaning the Drum Cleaning Unit
		Replacing the Pre-exposure Plastic Film
		Removing the Drum Unit
		Removing the Photosensitive Drum
		Cleaning Photosensitive Drum
		Cleaning the Drum edges
		Removing the Cleaner Separation Claw
		Removing the Side Seal
		Removing the Developing Assembly
		Cleaning the Developing Assembly
		Removing the ETB Unit
		Removing the ETB
		Cleaning the ETB
		Removing the Transfer Roller
		Removing the ETB Cleaning Blade
		Removing the ETB Brush Roller
		Removing the Waste Toner Container
		Removing the Drum Heater
		Removing the Primary Charging Shutter Unit
		Removing the Pre-transfer Charging Assembly Shutter Unit
		Removing the Patch Sensor
		Removing the Drum Brush Roller
		Removing the ETB Drive Unit
		Removing the Transfer Cleaning Unit
		Removing the Post-transfer Static Eliminator
		Removing the Toner Receptacle Tray
		Removing the Hopper Unit
		Removing the Buffer Unit
		Removing the Potential Control PCB Unit
		Removing the Waste Toner Feed Unit
		Removing the Drum Drive Unit
		Removing the Developing Drive Unit
	Fixing
		Removing the Fixing Assembly
		Cleaning the Fixing Inlet Guide,Fixing Inlet Sensor Flag, Fixing Right Stay, Dowel, Dowel Holder
		Cleaning the Inner Delivery Roller
		Cleaning the Fixing Oil Pan
		Removing the Fixing Cleaning Web
		Cleaning the Fixing Roller Static Eliminator
		Separating the Fixing Upper Unit from the Fixing Lower Unit
		Removing the Fixing Roller, Insulating Bush and Thrust Stopper
		Removing the Pressure Roller
		Removing the Pressure Roller Static Eliminator
		Removing the Main Thermistor
		Removing the Sub Thermistor 1
		Removing the Sub Thermistor 2
		Removing the Upper Separation Claw
		Cleaning the Upper Separation Claw
		Removing the Thermoswitch 2
	Pickup/Feed System
		Removing the Left Pickup Deck
		Removing the Left Deck Pickup Roller
		Removing the Left Deck Feed Roller
		Removing the Right Pickup Deck
		Removing the Left Deck Separation Roller/Cleaning the Left Deck Pickup Sensor 2 (PS20)
		Removing the Right Deck Pickup Roller
		Removing the Right Deck Feed Roller
		Removing the Right Deck Separation Roller/Cleaning the Right Deck Pickup Sensor 2 (PS19)
		Removing the Upper Cassette
		Removing the Upper Cassette Pickup Roller
		Removing the Upper Cassette Feed Roller
		Removing the Upper Cassette Separation Roller/Cleaning the Cassette 3 Pickup Sensor 2 (PS21)
		Removing the Lower Cassette
		Removing the Lower Cassette Pickup Roller
		Removing the Lower Cassette Feed Roller
		Removing the Lower Cassette Separation Roller/Cleaning the Cassette 4 Pickup Sensor 1 (PS22)
		Removing the Multi-purpose Tray Feed Roller
		Removing the Multi-purpose Tray Separation Roller
		Cleaning the Pickup and Fixing Feed Assembly
		Removing the Left Deck Pickup Unit
		Removing the Right Deck Pickup Unit
		Removing the Cassettes 3 and 4 Pickup Unit
		Removing the Vertical Path Cassette Pickup Drive Unit
		Removing the Registration Unit
		Removing the Left Deck Pickup Drive Unit
		Removing the Main Drive Unit
	External Auxiliary System
		Removing the Filter (for primary charging)
		Removing the Ozone Filter
		Removing the DC Controller PCB
		Removing the Power Supply Assembly
		Removing the Fixing Power Unit
		Removing the Feed Driver PCB
		Removing the Upper High Voltage Unit
		Removing the Upright Control Panel
5 - Adjustment
	Overview
	When replacing parts
		Controller System
			HDD
			Main Controller PCB 1
			Main Controller PCB 2
			TPM PCB
			Flash PCB
		Image Formation System
			Primary Charging Wire
			Primary Charging Assembly
			Pre-transfer Charging Assembly
			Pre-transfer Charging Wire
			Photosensitive Drum
			Drum Side Seals (Front and Rear)
			Developing Assembly
			Potential Sensor / Potential Control PCB
			ETB Unit / ETB
			Patch Sensor
			Waste Toner Container
		Fixing System
			Fixing Roller
		External Auxiliary System
			DC Controller PCB
6 - Troubleshooting
	Test Print
		Overview
		How to View the Test Print
			Grid (TYPE=1)
			17 gradations (TYPE=2/3)
			Solid white (TYPE=4)
			Halftone (TYPE=5/6/11/12/13/14)
			Solid black (TYPE=7)
			Horizontal line (TYPE=8/9/10)
	Image Faults
		Trailing Edge Shock Imaget
		Uneven density correction by 2D shading
		ADF black line
		Bleed-thru/Soil appeared on the back of the paper (Staple Finisher D1/Booklet Finisher D1)
		White line (foreign matter between Developing Sleeves)
		Separation Failure Jam due to Deformation of Separation Claw
		Image error due to soil attached to the Cleaning Brushes for the Duplex Right Roller and the Duplex Outlet Roller
		Uneven density
		Smeared image
		Image failure due to the temperature rising at the edge of the Fixing Roller (crepe mark)
		MTF Adjustment
			Adjustment Procedure
			When Making Fine Adjustment After Sampling the MTF Value
			When Disabling the MTF Adjustment
	Feed Faults
		Paper wrinkle
	Other
		Adjusting rotation of the Upright Control Panel Arm
		Remedy to be implemented when the ETB Disengage Member (Transfer Frame Stopper) is left unremoved
		Checking nip width
	Version upgrade
		Overview
			Overview of Version Upgrade
			Writing System Software
			System Software Components
			Note on Download Process
		Version Upgrade via SST
			Overview
			Copying System Software
			Connection
			Downloading System Software (Assist mode)
			Downloading System Software (Single mode)
			Formatting HDD
			Backup
		Version Upgrade using USB memory Storage Device
			Relation between SST and USB memory storage device Storage Device
			Copying System Software
			Connection
			Upgrading System Software
			Downloading/Writing System Software (Automatic)
			Downloading System Software (Confirmation)
			Downloading System Software (Overwriting)
			Formatting HDD
			Backup
			Clearing Download File
			Download Menu 2
			Other Menu
		Troubleshooting
			Error Code: E753-0001
	Making Initial Checks
		List of Initial Check Items
7 - Error Code
	Overview
		Outline
			Location code
			Location code
			Points to Note When Clearing MN-CON
			Points to Note When Clearing HDD
	Error Code
		Error Code Details
			E000 to E069
			E100 to E197
			E202 to E280
			E301 to E355
			E400 to E490
			E500 to E5F9
			E602
			E604 to E677
			E710 to E753
			E804 to E996
	Jam Code
		Jam Type
		Main Unit
		Duplex Color Image Reader-C1
		Paper Deck Unit-C1
		POD Deck Light-A1
		Inserter-K1
		Professional Puncher-C1/Integration Unit-B1
		PaperFolding Unit-H1
		Staple Finisher-D1/Booklet Finisher-D1
	Alarm Code
		List of Alarm Code
8 - Service Mode
	Overview
		Service Mode Menu
		Service mode item explanations
		I/O information enhancement
		Display of Error Code/Alarm Code description
		COPIER > OPTION > BODY, Item Segmentation
		Security features
			Related service modes
		Switching Screen (Level 1 < - > 2)
		Language switch
		Back-up of service mode
	COPIER
		DISPLAY
			VERSION
			USER
			ACC-STS
			ANALOG
			CST-STS
			HV-STS
			CCD
			DPOT
			DENS
			SENSOR
			MISC
			ENVRNT
			2D-SHADE
		I/O (I/O display mode)
			Host Machine_DC Controller (DC-CON>P001 to P030)
			Host Machine_Main Controller (DC-CON>P001 to P005))
			Reader (R-CON>P001 to P005)
			ADF (FEEDER>P001 to P007)
			Paper Deck Unit - C1 (DC-CON>P048 to P050)
			POD Deck Lite - A1 (DC-CON>P047 to P050)
			Inserter - K1 (DC-CON>P045 to P054)
			Paper Folding Unit - H1 (DC-CON>P045 to P071)
			Professional Puncher - C1 + Integration Unit-B1 (SORTER>P058 to P059)
			Staple Finisher - D1 / Booklet Finisher -D1 (SORTER>P001 to P059)
			Inner Trimmer - A1 (SORTER>P024 to P028)
		ADJUST
			AE
			ADJ-XY
			CCD
			LASER
			IMG-REG
			DEVELOP
			DENS
			BLANK
			V-CONT
			PASCAL
			HV-PRI
			HV-TR
			FEED-ADJ
			CST-ADJ
			MISC
			EXP-LED
		FUNCTION
			INSTALL
			CCD
			DENS
			DPC
			CST
			CLEANING
			FIXING
			PANEL
			PART-CHK
			CLEAR
			MISC-R
			MISC-P
			SENS-ADJ
			SYSTEM
			2D-SHADE
		OPTION
			FNC-SW
			DSPLY-SW
			IMG-FIX
			IMG-DEV
			IMG-LSR
			IMG-RDR
			IMG-MCON
			CLEANING
			ENV-SET
			FEED-SW
			NETWORK
			CUSTOM
			USER
			CST
			ACC
			INT-FACE
			TEMPO
			LCNS-TR
		TEST
			PG
			NETWORK
		COUNTER
			TOTAL
			PICK-UP
			FEEDER
			JAM
			MISC
			JOB
			PRDC-1
			DRBL-1
			DRBL-2
			T-CNTR
			SORTER
	FEEDER
		DISPLAY
		ADJUST
		FUNCTION
		OPTION
	SOATER
		ADJUST
		FUNCTION
		OPTION
	BOARD
		OPTION
9 - Installation
	Checking before Installation
		Checking Power Supply
		Checking the Installation Environment
		Checking Installation Space
		Points to Note at Installation Work
	Table of Options Combination
		Order to Install the Host machine and the Options
	Checking the Contents
	Unpacking
	Installation
		Installation of the Upright Control Panel
		Installing the Developing Assembly
		Installing the Pickup Assembly
		Installing the Fixing Assembly
		Installing the Toner Container
		Installing the Exhaust Filter
		Installing the USB Device Port (only with the products designed for Europe)
		Setting the Environment Heater Switch
		Turning ON the Main Power
		Turning OFF the Main Power
		Toner Stirring
		Installation of the Host Machine
		Other Installation Work
		Setting the Deck
		Setting the Paper Cassette
		Auto Adjust Gradation
		Image Position Adjustment
			Left Edge Margin Adjustment (1st side)
			Adjusting margin of Multi-purpose Pickup Tray
			Left Edge Margin Adjustment (2nd side)
			Leading Edge Margin Adjustment (1st side)
			Leading Edge Margin Adjustment (2nd side)
		Checking the Network Connection
			Overview
			Checking the Network Connection
			Operation Procedure Using Ping
			Checking by the Remote Host Address
		Network Troubleshooting
			Checking Connection of the Network Cable
			Operation Procedure Using Ping
		Checking the Network Setting of the Host Machine
		Checking Network Function on the Main Controller
	When Relocating the Machine
	Printer Cover -B1
		Points to Note at Installation
		Checking the Contents
			Parts to be used
			Parts not to be used
		Check Items when Turning OFF the Main Power
		Installation Procedure
		Operation Check
		Auto Adjust Gradation
	Reader Heater Unit
		Checking the Contents (ASIA only)
			Reader Heater Unit-G1
		Checking the Parts to be Installed (Europe only)
			Reader Heater Unit
		Check Items when Turning OFF the Main Power
		Installation Procedule
	Cassette Heater Unit
		Checking the Contents (Asia only)
			Cassette Heater Unit-38
		Checking the Parts to be Installed (Europe only)
		Check Items when Turning OFF the Main Power
		Installation Procedure
	Paper Deck Heater Unit-A1
		Checking the Contents
		Check Items when Turning OFF the Main Power
		Installation Procedure (Paper Deck Unit-C1)
	Utility Tray-A1
		Checking the Contents
		Installation Procedure
		When Installing the USB Keyboard
	Card Reader-C1
		Points to Note at Installation
		Checking the Contents
			Contents of Card Reader-C1
			Contents of Copy Card Reader Attachment-A2
		Check Items when Turning OFF the Main Power
		Installation Procedure
		Setting After Installation
	Voice Guidance Kit-F1
		Points to Note at Installation
		Checking the Contents
		Check Items when Turning OFF the Main Power
		Installation Procedure
		Checking after Installation
		Operation Check
	Installation Procedure for Expansion Bus-F1, IPSec Board-B2 and Wireless LAN Board-B1
		Points to Note at Installation
		Checking the Contents
			Expansion Bus-F1/F2
			IPSec Board-B2
			Wireless LAN Board-B1
		Check Items when Turning OFF the Main Power
		Installation Procedure
			Removing the Main Controller PCB 1
			Installing the Expansion Bus-F1 and the IPSec Board-B2 Simultaneously
			Installing the Expansion Bus-F1, the Wireless LAN Board-B1 and the IPSec Board-B2 Simultaneously
		Checking after Installation
	Additional Memory Type B (512MB)
		Checking the Contents
		Checking before Installation
		Check Items when Turning OFF the Main Power
		Installation Procedure
		Checking after Installation
	Combination of HDD Options
	[TYPE-1] Option HDD (250GB)
		Checking the Contents
		Points to Note Regarding Data Backup/Export
		Making a Backup of the Data (Reference only)
		Check Items when Turning OFF the Main Power
		Assembling the Option HDD
		Procedure to Replace with the HDD
		Installing the System Software Using the SST
		Execution of Auto Gradation Adjustment
	[TYPE-2] Removable HDD Kit
		Checking the Contents
		Check Items when Turning OFF the Main Power
		Installation Procedure
			Removing the HDD and HDD Case Unit
			Disassembling and Assembling of the HDD Removed from the Host Machine
			Changing Configuration inside of HDD Case Unit
			Installing the HDD Case Unit
	[TYPE-3] Option HDD (250GB) + Removable HDD Kit
		Checking the Contents
			Option HDD (250GB)
			Removable HDD Kit
		Points to Note Regarding Data Backup/Export
		Making a Backup of the Data (Reference only)
		Check Items when Turning OFF the Main Power
		Installation Procedure
			Assembling the Option HDD
			Removing the HDD and HDD Case Unit
			Changing Configuration inside of HDD Case Unit
			Installing the HDD Case Unit
		Installing the System Software Using the SST
		Execution of Auto Gradation Adjustment
	[TYPE-4] Option HDD (80GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit
		Points to Note when Unpacking HDD Data Encryption & Mirroring Kit
		Checking the Contents
			Option HDD (80GB)
			HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit
		Points to Note when HDD Data Encryption & Mirroring Kit has been Installed
			Points to Note Regarding Data Backup/Export
			Making a Backup of the Data (Reference only)
		Check Items when Turning OFF the Main Power
		Installation Procedure
			Removing the Covers
			Installing the Mirroring Board or Encryption Board
		After Installing HDD Data Encryption & Mirroring Kit
			Installing the System Software Using the SST
			Checking the Security Version
			Checking the Security Mark
		Setting for Mirroring
		After Installing HDD Data Encryption & Mirroring Kit
			Reporting to the System Administrator at the End of the Work
			Execution of Auto Gradation Adjustment
	[TYPE-5] 2 Option HDDs (250GB) + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit
		Points to Note when Unpacking HDD Data Encryption & Mirroring Kit
		Checking the Contents
			Option HDD (250GB)
			HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit
		Points to Note when HDD Data Encryption & Mirroring Kit has been Installed
			Points to Note Regarding Data Backup/Export
			Making a Backup of the Data (Reference only)
		Check Items when Turning OFF the Main Power
		Installation Procedure
			Assembling the Option HDD
			Removing the Covers
			Installing the Mirroring Board or Encryption Board
		Installing the System Software Using the SST
		After Installing HDD Data Encryption & Mirroring Kit
			Checking the Security Version
			Checking the Security Mark
		Setting for Mirroring
		Reporting to the System Administrator at the End of the Work (only when HDD Data Encryption & Mirroring Kit has been installed)
		Execution of Auto Gradation Adjustment
	[TYPE-6] HDD Data Encryption & Mirroring Kit
		Points to Note when HDD Data Encryption & Mirroring Kit has been Installed
		Checking the Contents
		Points to Note Regarding Data Backup/Export
		Making a Backup of the Data (Reference only)
		Check Items when Turning OFF the Main Power
		Installation Procedure
			Removing the Covers
		Installing the Encryption Board
		Installing the System Software Using the SST
		Checking the Security Version
		Checking the Security Mark
		Checking after Installation
		Reporting to the System Administrator at the End of the Work
		Execution of Auto Gradation Adjustment
	[TYPE-7] Option HDD (250GB) + HDD Data Encryption & Mirroring Kit
		Points to Note when Unpacking HDD Data Encryption & Mirroring Kit
		Checking the Contents
			Option HDD (250GB)
			HDD Data Encryption & Mirroring Kit
		Points to Note Regarding Data Backup/Export
		Making a Backup of the Data (Reference only)
		Check Items when Turning OFF the Main Power
		Installation Procedure
			Assembling the Option HDD
			Removing the Covers
		Installing the Encryption Board
		Installing the System Software Using the SST
		Checking the Security Version
		Checking the Security Mark
		Checking after Installation
		Reporting to the System Administrator at the End of the Work
		Execution of Auto Gradation Adjustment
	[TYPE-8] Option HDD (80GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit
		Points to Note when Unpacking HDD Data Encryption & Mirroring Kit
		Checking the Contents
			Option HDD (80GB)
			Removable HDD Kit
			HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit
		Points to Note when HDD Data Encryption & Mirroring Kit has been Installed
			Points to Note Regarding Data Backup/Export
			Making a Backup of the Data (Reference only)
		Check Items when Turning OFF the Main Power
		Installation Procedure
			Removing the HDD and HDD Case Unit
			Disassembling and Assembling of the HDD Removed from the Host Machine (the First HDD)
			Assembling the Option HDD (the Second HDD)
			Changing Configuration inside of HDD Case Unit
			Installing the Mirroring Board or Encryption Board and HDD Case Unit
		After Installing HDD Data Encryption & Mirroring Kit
			Installing the System Software Using the SST
			Checking the Security Version
			Checking the Security Mark
		Setting for Mirroring
		After Installing HDD Data Encryption & Mirroring Kit
			Reporting to the System Administrator at the End of the Work
			Execution of Auto Gradation Adjustment
	[TYPE-9] 2 Option HDDs (250GB) + Removable HDD Kit + HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit
		Points to Note when HDD Data Encryption & Mirroring Kit has been Installed
		Checking the Contents
			Option HDD (250GB)
			Removable HDD Kit
			HDD Mirroring Kit or HDD Data Encryption & Mirroring Kit
		Points to Note when HDD Data Encryption & Mirroring Kit has been Installed
			Points to Note Regarding Data Backup/Export
			Making a Backup of the Data (Reference only)
		Check Items when Turning OFF the Main Power
		Installation Procedure
			Assembling the Option HDD
			Removing the HDD and HDD Case Unit
			Changing Configuration inside of HDD Case Unit
			Installing the Mirroring Board or Encryption Board and HDD Case Unit
		Installing the System Software Using the SST
		After Installing HDD Data Encryption & Mirroring Kit
			Checking the Security Version
			Checking the Security Mark
		Setting for Mirroring
		Reporting to the System Administrator at the End of the Work (Only When HDD Data Encryption & Mirroring Kit has been Installed)
		Execution of Auto Gradation Adjustment
	[TYPE-10] Removable HDD Kit + HDD Data Encryption & Mirroring Kit
		Points to Note when Unpacking HDD Data Encryption & Mirroring Kit
		Checking the Contents
			Removable HDD Kit
			HDD Data Encryption & Mirroring Kit
		Points to Note Regarding Data Backup/Export
		Making a Backup of the Data (Reference only)
		Check Items when Turning OFF the Main Power
		Installation Procedure
			Removing the HDD and HDD Case Unit
			Disassembling and Assembling of the HDD Removed from the Host Machine
			Changing Configuration inside of HDD Case Unit
			Installing the Encryption Board and HDD Case Unit
		Installing the System Software Using the SST
		Checking the Security Version
		Checking the Security Mark
		Checking after Installation
		Reporting to the System Administrator at the End of the Work
		Execution of Auto Gradation Adjustment
	[TYPE-11] Option HDD (250GB) + Removable HDD Kit + HDD Data Encryption & Mirroring Kit
		Points to Note when Unpacking HDD Data Encryption & Mirroring Kit
		Checking the Contents
			Option HDD (250GB)
			Removable HDD Kit
			HDD Data Encryption & Mirroring Kit
		Points to Note Regarding Data Backup/Export
		Making a Backup of the Data (Reference only)
		Check Items when Turning OFF the Main Power
		Installation Procedure
			Assembling the Option HDD
			Removing the HDD and HDD Case Unit
			Changing Configuration inside of HDD Case Unit
			Installing the Encryption Board and HDD Case Unit
		Installing the System Software Using the SST
		Checking the Security Version
		Checking the Security Mark
		Checking after Installation
		Reporting to the System Administrator at the End of the Work
		Execution of Auto Gradation Adjustment
	HDD Data Encryption & Mirroring Kit-C2
		Points to Note at Installation
		Checking the Contents
		Check Items when Turning OFF the Main Power
		In the Case of Fixed HDD
			Assembling the Option HDD
			Removing the Covers
			Installing the Encryption Board
		Checking after Installation
	HDD Data Encryption & Mirroring Kit-C2 + Removable HDD Kit
		Points to Note at Installation
		Checking the Contents
		Check Items when Turning OFF the Main Power
		In the Case of the Removable HDD
			Removing the Fixed HDD/HDD Case Unit
			Assembling the Removable HDD
			Changing Configuration inside of HDD Case Unit
			Installing the Encryption Board/HDD Case Unit
		Checking after Installation
Appendix
	Service Tools
		Special Tools
		Solvents and Oils
	General Timing Chart
		Basic sequence at power ON
		Basic sequence at printing <Condition: A4 1-sided (2 sheets), Right deck, Reverse delivery>
		Basic sequence at printing <Condition: A4 2-sided (2 sheets), Right deck, Reverse delivery>
	General Circuit Diagram
		Signal Input/Output List
		General Circuit Diagram
			General Circuit Diagram (1/30)
			General Circuit Diagram (2/30)
			General Circuit Diagram (3/30)
			General Circuit Diagram (4/30)
			General Circuit Diagram (5/30)
			General Circuit Diagram (6/30)
			General Circuit Diagram (7/30)
			General Circuit Diagram (8/30)
			General Circuit Diagram (9/30)
			General Circuit Diagram (10/30)
			General Circuit Diagram (11/30)
			General Circuit Diagram (12/30)
			General Circuit Diagram (13/30)
			General Circuit Diagram (14/30)
			General Circuit Diagram (15/30)
			General Circuit Diagram (16/30)
			General Circuit Diagram (17/30)
			General Circuit Diagram (18/30)
			General Circuit Diagram (19/30)
			General Circuit Diagram (20/30)
			General Circuit Diagram (21/30)
			General Circuit Diagram (22/30)
			General Circuit Diagram (23/30)
			General Circuit Diagram (24/30)
			General Circuit Diagram (25/30)
			General Circuit Diagram (26/30)
			General Circuit Diagram (27/30)
			General Circuit Diagram (28/30)
			General Circuit Diagram (29/30)
			General Circuit Diagram (30/30)
	List of User Mode
		Device Information Delivery Settings
		Environment Settings
			Paper Settings
			Display Settings
			Timer/Energy Settings
			Network
			External Interface
			Accessibility
		Adjustment/Maintenance
			Adjust Image Quality*1
			Adjust Action*1
			Maintenance
		Function Settings
			Common
			Copy*1
			Printer
			Send
			Receive/Forward
			Store/Access Files
			Encrypted Secure Print
		Set Destination
			Set Destination
		Management Settings
			User Management
			Device Management
			License/Other
			Data Management
	Backup Data
	Detail of HDD partition
	Soft Counter List
		Soft counter specifications
		Soft Counter List
			000 to 099
			100 to 199
			200 to 299
			300 to 399
			400 to 499
			500 to 599
			600 to 699
			700 to 799
			800 to 899
			900 to 999
                        
Document Text Contents
Page 1

987654321

imageRUNNER ADVANCE 8105 / 8095 / 8085 Series
Service Manual


August 10, 2010
Revision 2

Page 2

Application

apply to your locality.

Corrections
This manual may contain technical inaccuracies or typographical errors due to improvements
or changes in products. When changes occur in applicable products or in the contents of this

edition of this manual.

Trademarks
The product names and company names used in this manual are the registered trademarks
of the individual companies.

Copyright

(C) CANON INC. 2010

Caution

information.

Page 692

7

7
7-78

7-78

Error Code > Error Code > Error Code Details > E710 to E753

Error Code > Error Code > Error Code Details > E710 to E753

E
Code

Detail
Code

Location Item Description

E732 -0001 -00 Title Reader communication error
Remedy 1. Check the connection of the Connector with the Reader.

2. Check the power of the Reader (check if the initialization
operation is executed at startup).

3. Replace the Reader Controller PCB and the Main
Controller PCB.

Description Communication error.
E732 -0010 -00 Title Reader communication error

Remedy 1. Check the connection of the Connector with the Reader.
2. Check the power of the Reader (check if the initialization

operation is executed at startup).
3. Replace the Reader Controller PCB and the Main

Controller PCB.
Description Unable to detect Vsync from the Reader Controller although

2 minutes have passed after the completion of register setting
of the Main Controller.

E732 -9999 -00 Title Detection of Reader
Remedy ---
Description

model. (On the user screen, only the message"Turn OFF
and then ON the power again", instead of an error code, is
displayed. It is recorded as an error log in Service Mode >
DISPLAY > ERR.)

E733 -0000 -00 Title Printer communication error
Remedy 1. Check the connection of the Connector with the printer.

2. Check the power of the printer (check if the initialization
operation is executed at startup).

3. Replace the DC Controller or the Main Controller PCB.
Description Unable to communicate with printer at startup.

E733 -0001 -00 Title Printer communication error
Remedy 1. Check the connection of the Connector with the printer.

2. Check the power of the printer (check if the initialization
operation is executed at startup).

3. Replace the DC Controller or the Main Controller PCB.
Description Communication error between the Main Controller and the

DC Controller.
E733 -0002 -00 Title Printer communication error

Remedy 1. Check the connection of the Connector with the printer.
2. Check the power of the printer (check if the initialization

operation is executed at startup).
3. Replace the DC Controller or the Main Controller PCB.

Description Communication error between the Main Controller and the
DC Controller.

E
Code

Detail
Code

Location Item Description

E733 -0010 -00 Title Printer communication error
Remedy 1. Check the connection of the Connector with the printer.

2. Check the power of the printer (check if the initialization
operation is executed at startup).

3. Replace the DC Controller or the Main Controller PCB.
Description Error to detect printer vertical synchronous signal.

E740 -0002 -00 Title Network Controller error
Remedy 1. Check the connection of the LAN Connector.

2. Check the connection of the Main Controller PCB 1.
3. Replacement of the Main Controller PCB 1.

Description Invalid MAC address.
E743 -0000 -04 Title DDI communication error

Remedy 1. Connection error between the Main Controller PCB and the
Reader Controller PCB.

2. Failure of the Reader Controller PCB (PCB1).
3. Failure of the Main Controller PCB.

Description The Reader Controller PCB detected the communication error
between the Main Controller PCB and the Reader Controller
PCB.

E743 -0003 -04 Title DDI communication error
Remedy 1. Connection error between the Main Controller PCB and the

Reader Controller PCB.
2. Failure of the Reader Controller PCB (PCB1).
3. Failure of the Main Controller PCB.

Description The Reader Controller PCB detected the communication error
between the Main Controller PCB and the Reader Controller
PCB.

E743 -0004 -04 Title DDI communication error
Remedy 1. Connection error between the Main Controller PCB and the

Reader Controller PCB.
2. Failure of the Reader Controller PCB (PCB1).
3. Failure of the Main Controller PCB.

Description The Reader Controller PCB detected the communication error
between the Main Controller PCB and the Reader Controller
PCB.

E744 -0001 -00 Title
Remedy
Description Version of language in HDD and version of Bootable are

different.
E744 -0002 -00 Title

Remedy
Description Size of the language in HDD is too big.

Page 693

7

7
7-79

7-79

Error Code > Error Code > Error Code Details > E710 to E753

Error Code > Error Code > Error Code Details > E710 to E753

E
Code

Detail
Code

Location Item Description

E744 -0003 -00 Title
Remedy
Description

E744 -0004 -00 Title
Remedy
Description Unable to switch to the language in HDD.

E744 -1000 -00 Title
Remedy Replace the Boot ROM with the one for the correct model.
Description The Boot ROM for the different model is installed.

E744 -2000 -00 Title
Remedy Replace the Soft ID with the one for the correct model.
Description When the engine ID described in Soft ID is invalid.

E744 -4000 -05 Title Engine ID error
Remedy Replace the DC Controller PCB (PCB1) or redownload.
Description The Main Controller PCB model and the DC Controller PCB

(PCB1) model are not matched.
E746 -0003 -00 Title Different Image Analysis PCB model

Remedy 1. Check the connection of the Image Analysis PCB.
2. Replace the Image Analysis PCB.

Description Different Image Analysis PCB model.
E746 -0021 -00 Title Image Analysis PCB self-check error detection

Remedy 1. Check the connection of the Image Analysis PCB.
2. Replace the Image Analysis PCB.

Description Image Analysis PCB self-check error detection.
E746 -0022 -00 Title Invalid Image Analysis PCB version

Remedy 1. Upgrade the Image Analysis PCB software.
2. Replace the Image Analysis PCB.

Description Invalid Image Analysis PCB version.
E746 -0023 -00 Title No reply from Image Analysis PCB

Remedy 1. Check the connection of the Image Analysis PCB.
2. Replace the Image Analysis PCB.

Description No reply from Image Analysis PCB.
E746 -0024 -00 Title Image Analysis PCB operation error

Remedy 1. Check the connection of the Image Analysis PCB.
2. Replace the Image Analysis PCB.

Description Image Analysis PCB operation error.

E
Code

Detail
Code

Location Item Description

E746 -0031 -00 Title Hardware error (TPM)
Remedy The TPM PCB is not installed, the TPM PCB for other model

is installed, or failure of TPM Chip.
Description Hardware error (TPM).

E746 -0032 -00 Title Error which the system recovery is not possible occurs (TPM)
Remedy Location of security information in HDD/SRAM is unknown.

Execute"Initialize All Data/Settings".
Description Error which the system recovery is not possible occurs (TPM).

E746 -0033 -00 Title Error occurs, but system recovery is possible (TPM)
Remedy Mismatch of key.

Execute restoration of the TPM key.
Description Error occurs, but system recovery is possible (TPM).

E746 -0034 -00 Title Error occurs, but auto recovery of system is possible (TPM)
Remedy Mismatch of key occurs. However, recovery by restart is

possible.
Turn OFF and then ON the power.

Description Error occurs, but auto recovery of system is possible (TPM).
E748 -2000 -00 Title Main Controller PCB access error

Remedy Replace the Main Controller PCB 1/2.
Description Main Controller PCB Chip access error.

E748 -2001 -00 Title Main Controller PCB access error
Remedy 1. Remove and then reinstall the DDR2-SDRAM(M0/M1/P).

2. Replace the Main Controller PCB 1/2.
Description Main Controller PCB memory access error.

E748 -4910 -00 Title Main Controller PCB 2 error
Remedy Replace the Main Controller PCB 2.
Description Main Controller PCB 2 error.

E748 -9000 -00 Title System error
Remedy Contact to the sales companies
Description ---

E753 -0001 -00 Title Download error
Remedy Turn OFF and then ON the power.
Description Firmware update error.

Similer Documents