Download NACE Standards List PDF

TitleNACE Standards List
File Size269.8 KB
Total Pages11
Document Text Contents
Page 1

Standard Practices

NACE SP0106 - Control of Internal Corrosion in Steel Pipelines and Piping Systems

NACE SP0107 - Electrochemical Realkalization and Chloride Extraction for Reinforced Concrete

NACE SP0108 - Corrosion Control of Offshore Structures by Protective Coatings

NACE SP0169 - Control of External Corrosion on Underground or Submerged Metallic Piping Systems

NACE SP0176 - Corrosion Control of Submerged Areas of Permanently Installed Steel Offshore Structures Associated with Petroleum Production

NACE SP0177 - Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems

NACE SP0178 - Design, Fabrication, and Surface Finish Practices for Tanks and Vessels to Be Lined for Immersion Service

NACE SP0181 - Liquid-Applied Internal Protective Coatings for Oilfield Production Equipment

NACE SP0185 - Extruded Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe

NACE SP0186 - Application of Cathodic Protection for External Surfaces of Steel Well Casings

NACE SP0188 - Discontinuity (Holiday) Testing of New Protective Coatings on Conductive Substrates

NACE SP0191 - Application of Internal Plastic Coatings for Oilfield Tubular Goods and Accessories

NACE SP0195 - Corrosion Control of Sucker Rods by Chemical Treatment

NACE SP0199 - (Formerly RP0199) Installation of Stainless Chromium-Nickel Steel and Nickel-Alloy Roll-Bonded and Explosion-Bonded Clad Plate in Air Pollution Control Equipment

NACE SP0200 - Steel-Cased Pipeline Practices

NACE SP0206 - Internal Corrosion Direct Assessment Methodology for Pipelines Carrying Normally Dry Natural Gas (DG-ICDA)

NACE SP0207 - Performing Close-Interval Potential Surveys and DC Surface Potential Gradient Surveys on Buried or Submerged Metallic Pipelines

NACE SP0273 - Handling and Proper Usage of Inhibited Oilfield Acids

NACE SP0286 - Electrical Isolation of Cathodically Protected Pipelines

NACE SP0290 - Impressed Current Cathodic Protection of Reinforcing Steel in Atmospherically Exposed Concrete Structures

NACE SP0294 - Design, Fabrication, and Inspection of Tanks for the Storage of Concentrated Sulfuric Acid and Oleum at Ambient Temperatures

NACE SP0295 - Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars

NACE SP0298 - Sheet Rubber Linings for Abrasion and Corrosion Service

NACE SP0302 - Selection and Application of a Coating System to Interior Surfaces of New and Used Rail Tank Cars in Molten Sulfur Service

NACE SP0386 - Application of a Coating System to Interior Surfaces of Covered Steel Hopper Railcars in Plastic, Food, and

NACE SP0387 - Metallurgical and Inspection Requirements for Cast Galvanic Anodes for Offshore Applications

NACE SP0388 - Impressed Current Cathodic Protection of Internal Submerged Surfaces

NACE SP0398 - Recommendations for Training and Qualifying Personnel as Railcar Coating and Lining Inspectors

NACE SP0403 - Avoiding Caustic Stress Corrosion Cracking of Carbon Steel Refinery Equipment and Piping

NACE SP0407 - Format, Content, and Guidelines for Developing a Materials Selection Diagram

NACE SP0487 - Considerations in the Selection and Evaluation of Rust Preventives and Vapor Corrosion Inhibitors for Interim (Temporary) Corrosion Protection

NACE SP0490 - Holiday Detection of Fusion-Bonded Epoxy External Pipeline Coating of 250 to 760 um (10 to 30 mil)

NACE SP0492 - Metallurgical and Inspection Requirements for Offshore Pipeline Bracelet Anodes

NACE SP0499 - Corrosion Control and Monitoring in Seawater Injection Systems

NACE SP0502 - Pipeline External Corrosion Direct Assessment Methodology

NACE SP0507 - External Corrosion Direct Assessment (ECDA) Integrity Data Exchange (IDX) Format

NACE SP0575 - Internal Cathodic Protection (CP) Systems in Oil-Treating Vessels

NACE SP0590 - Prevention, Detection, and Correction of Deaerator Cracking

Page 2

Similer Documents