Download Wireline Completion Tools PDF

TitleWireline Completion Tools
File Size2.7 MB
Total Pages124
Document Text Contents
Page 63

“WPX” Plug
Sizes 1.875 / 2.313 / 2.750 / 2.813

(selective)


The Wireline Solutions “WPX” Plug is a device capable of holding
pressure differentials from above or below when set at any WX Profile
Nipple of the same size.





MATERIAL SELECTION:
9% Chrome 4140 / L80
80,000 yield 80,000 Yield


ITEM PART NAME No. REQ.

1 Equalizing Prong Assembly 1

2 “WX” Lock Mandrel 1

3 #033 O-Ring (Size 2.75 / 2.81) 1

4 Equalizing Sub Assembly 1

DATA AND CRITICAL DIMENSIONS

Prong Running Tool: Type “SB”

Prong Pulling Tool: Type “SB”

Mandrel Running Tool: Type “WX-Line”

Mandrel Pulling Tool: Type “GR / GS”

SIZE A B C D

1.875 1.375 1.380 1.875 1.870

2.313 1.375 1.810 2.313 2.307

2.750 1.375 2.312 2.750 2.745

2.813 1.375 2.312 2.813 2.802

4

1

2

3

C

D

B

A

Page 123

Tubing End Locator

SIZE – O.D. 1 1/4” 1 1/2” 1 3/4”

PART NUMBER 3570-125-00 3570-150-00 3570-175-00

Other sizes available on request

The Tubing End Locator is used to locate the lower end of the tubing so

that its depth may be accurately measured.

The Tubing End Locator consists of a slotted body in which a spring-

loaded latch is retained. A shear pin limits the outward travel or rotation of

the latch. When the tool emerges from the lower end of the tubing, the latch

will be stopped in a position that is approximately perpendicular to the body

and can now re-enter the tubing until the shear pin is cut.

Tubing End Locator

Tubing Swedge

Tubing Swedge
The Tubing Swedge is used to swedge out mashed areas and other

obstructions in the tubing string to insure the free passage of the subsurface

controls. It is also used to open orange-peel type bull plugs on the lower

end of the tubing.

The Tubing Swegde is tapered on both ends. The upper end is threaded

with a pin connection and a fishing neck. Since the largest portions of the

swedge is approximately equal to the drift diameter of the tubing, a fluid

course is provided through the central bore and lateral ports.

SIZE

MAX O.D.

THREAD

CONNECTION

FISHING NECK

SIZE

PART

NUMBER

1.250” 15/16” – 10 UN PIN 1 3/16” 3580-125-00

1.500” 15/16” – 10 UN PIN 1 3/16” 3580-150-00

1.750” 15/16” – 10 UN PIN 1 3/16” 3580-175-00

1.843” 15/16” – 10 UN PIN 1 3/8” 3580-184-00

1.906” 15/16” – 10 UN PIN 1 3/8” 3580-190-00

2.250” 15/16” – 10 UN PIN 1 3/8” 3580-225-00

2.343” 15/16” – 10 UN PIN 1 3/8” 3580-234-00

2.500” 15/16” – 10 UN PIN 1 3/8” 3580-250-00

2.750” 1 1/16” – 10 UN PIN 1 3/4” 3580-275-00

2.875” 1 1/16” – 10 UN PIN 1 3/4” 3580-287-00

Other sizes available on request

Tubing End

Locator

Tubing Swedge

Similer Documents